PRECISION TOOLS, EQUIPMENT & SERVICES PTE LTD

                Registered Office: 78 Westwood Crescent, Singapore 648780

Company Registration Number : 200502559D
C.R. Number.............................. : 72559050000K

                Telephone: +65-67955571, Fax: +65-67955571, E-mail: queries@precisiontools.com.sg, akila@precisiontools.com.sg

Web Page: www.precisiontools.com.sg

Related Sites: www.precisiontoolssite.com, 

http://precisiontools.shopping.officelive.com

 

PRODUCTS              

 

MINI LATHES & MILLING MACHINES MICRO DRILL PRESS, ACCESSORIES & TOOLS

--CLISBY

--SHERLINE

--CAMERON

--XENDOLL

 

WORKING WITH METALS

--NISSEN INDUSTRIAL MARKERS

 

TWEEZERS

--DUMONT TWEEZERS

--SIPEL ELECTRONIC TWEEZERS AND TOOLS

 

FACETING MACHINES

--ULTRATEC FACETING MACHINE

 

ELECTRONIC TOOLS & EQUIPMENT

--MUELLER

--MOUSER

--DIGIKEY

--JAMECO

 

FOR YOUNG INVENTORS

--THAMES & COSMOS

 

JEWELLERY TOOLS

--BERGEON

--A&F

 

WATCH REPAIR & SERVICE TOOLS

 

PRESIDIUM STONE TESTING INSTRUMENTS

 

BOOKS & VIDEOS

 

ROUGH STONES

 

SHERLINE MINI LATHES-PRICE LIST

 
    Sherline Accessories & Tools Price List    
PN Notn DESCRIPTION Unit Rate Wt. Lb.
1010   OJT 5/32" # 1 Morse Jacobs Drill chuck & Key 70 0.5
1012   Sensitive Drilling Attachment for mill or mill column.5/32"jacobs drill chuck on spring-loaded shaft 110 1
1015   OJT 5/32" # 0 Morse Jacobs Drill chuck & Key 70 0.5
1016   OJT 5/32"  chuck w/# 0 Morse adjustable back 100 0.5
1030   4- Jaw Chuck (3.125" O.D) 135 2
1040   3- Jaw Chuck (3.125" O.D.) 130 2
1041   3- Jaw Chuck (2.5" O.D.) 100 2
1044   4- Jaw Chuck (2.5" O.D) 110 2
1069   3/8" Jacobs tailstock chuck w/0M and 1M arbors, drawbolt, key) 65 1.5
1072   1/4" Jacobs tailstock chuck w/0M and 1M arbors, drawbolt, key) 55 0.5
1074   Steady Rest 40 0.75
1075   Self Centering 4- Jaw Chuck (2.5" O.D) 130 2
1076   Self-Centering 4- Jaw Chuck (3.125" O.D) 165 2
1090   Follower Rest 70 0.75
1160   WW ColletSet, 5Pc W/1161Adaptor&Drawbolt,1/16To5/16"Collets 90 0.5
1161   WW Collet Adapter & Drawbar (adapts the WW taper to #1 Morse Taper of Headstock) 50 0.5
1162   Delux WW Collet Set (Inch) 275 3
1163   8.0MM Collet Adapter & Drawbar (This adaptor holds collets with a .314-.315 body ) 55 0.5
1164   WW Collet fixture-holds WW collets vertically on mill or rotary table 105 1
1165   8 mm collet fixture 115 1
1170   Oak WW Collet Storage Box (22Collets holes+Holes forpot chucks,drawbar,knockout bar,collet adaptor 25 1.5
1171   Oak WW Collet Storage Box (96Collets holes+Holes for pot chucks,drawbar,knockout bar,collet adaptor 32 1.5
1178   WW ColletSet, 5Pc W/1161Adaptor&Drawbolt,2 To 6 mm Collets 90 0.5
1179   Delux WW Collet Set (Metric) 245 3
1180   Complete Metric WW Collet Set in Oak Collet Box(78 Collets from 0.3mm to 8 mm+Blank Collet) 935 4
1182   Bullnose Live Center 80 0.75
1184   Vertical Milling Table(Mounts to Lathe) we have to order 1185 verticalmilling table inch version 120 2.5
1187   Chuck-to-T-slot Adapter 7.5 0.05
1191   Live Center 40 0.25
1200   RIGHT HAND, INTERNAL THREADING TOOL 1/16  20 1/16lb
1201   Adjustable Live Center 65 0.5
1202   Adjustable Tailstock Chuck Arbor 45 0.5
1203   Adjustable Tailstock Tool Holder (Holds 2085 or 2086 WW collet adaptor in tailstock) 45 0.5
1204   Adjustable Tailstock 5/32" chuck arbor  45 0.5
1206   Adjustable Tailstock 1" Die Holder with 13/16" bushing 60 0.5
1220   Tailstock spindle extender 40 0.5
1230   #0 Morse Arbor to 3/4 - 16 Chuck Thread Adaptor(to mount 3 or 4 Jaw Chuck on to Tailstock Spindle) 40 0.25
1270   Copound Slide Inch Direct Purchase from Sherline under Monthly Special 125 1
1272   Compound Slide Riser Block 35 0.5
1280   Copound Slide Metric Direct Purchase from Sherline under Monthly Special 125 1
1288   Riser Rocker Tool Post 40 0.5
1289   Riser 3/8" Insert Tool Post 40 0.5
1290   Steady Rest Riser 50 1.5
1291   Spacer Block Kit (Headstock Riser + Extended Riser Rocker Toolpost 70 1.5
1292   Tailstock Riser Block 50 1
1296   Cut Off Tool Holder Riser Block 50 0.5
1297   Mill Headstock Spacer Block 45 0.75
1300   Mill Column Spacer Block 40 1.5
2045   Index Block set Hexagon and octagon 60 2
2049   Spindle Handwheel  45 1.5
2083   WW collet w/1" Blank 30 0.05
2085   WW collet tailstock adaptor 55 0.25
2086   8 mm collet tailstock adaptor 60 0.25
2100   WW 3/4"  Collet Pot Chuck 25 0.05
2101   WW 1"  Collet Pot Chuck 27 0.05
2102   WW 1  1/4"  Collet Pot Chuck 30 0.05
2110   W.R Smith Watchmaker's T-Rest Bought Directly from Sherline much earlier  200 1
2126   Lathe Microscope Mount Only (Scope not included) 126 3
2127   Stereo Microscope with Mount for MIll 865 3
2200   Radius Cutting Attachment 120 1
2250   Quick Change Tool Post with 3 Holders (for 1/4" cutter,round boring tool and cutoff tool) 260 3
2251   Quick Change Tool Post Riser 50 1.8
2256   RH35DegInsertToolHolder w/55deg carbide insert 45 0.15
2257   LH35DegInsertToolHolder w/55deg carbide insert 45 0.15
2258   Pair of Right-and-Left-Hand 35 Deg 3/8" Carbide Insert Tool Holders (Included two 55 Deg inserts) 70 0.25
2261   Pair of 80 Deg and 55 Deg  3/8" Round Boring Tools with Inserts (2259 and 2260) 95 0.25
2265   3/8" Negative Rake Ceramic Insert Tool Holder (Included one 3-sided ceramic insert for 6 cuttingsurfaces 60 0.25
2266   Replacement ceramic insert (6Sides) for 2265 holder 15 0.1
2267   3/8" Carbide threading/grooving insert holder(No insert) 52.5 0.1
2268   60 Deg Carbide Threading Insert for 2267 holder (2 sides) 23 0.05
2269   .031" Carbide Grooving Insert fot 2267 holders (2 sides) 23 0.05
2270   .062" Carbide Grooving Insert fot 2267 holders (2 sides) 23 0.05
2295   Quick-Change Carbide insert holder  w/insert for 2250 90 1
3001   Power Feed, 120v 90 5
3002   Cut-off tool holder & tool 50 0.25
3003   Two-Position Tool Post for holding two 1/4" cutting tools for quicker tool changes 16 0.25
3004   Knurling tool holder and 1 set of knurls 75 0.25
3005   1/4" Square High Speed Steel Tool Blank 3 0.06
3006   Carbide tool set (3pcs=L.H;R.H;60deg threading/carbide tips are brazed to 1/4" tool shank) 20 0.38
3007   High speed steel tool set  (3pcs=L.H, R.H, boring/pre-sharpened 1/4" tool shank) 25 0.15
3008   Two-Position Tool Post for holding 5/16" and 3/8".Allows use of tools other than 1/4" cutting tools  25 0.25
3009   Cutting Tool Hight Gauge 20 0.5
3011   Power feed 240V single direction motor for lathe lead screw  Discontinued 0 0
3012   Hold-down set 25 0.4
3013   Step Block Hold Down Set 40 1
3015   Toggle switch dust cover 8.5 0.05
3016   Cutoff Tool Rear Mounting Block 15 0.15
3017   Cross Slide Accessory Plate 40 1
3018   Rear Mount Cut-Off Tool and Holder 50 0.25
3020   Sherline 5/32" Hex "T" Driver 6 0.15
3021   Ceter Drill set 16 0.05
3035   Spur Driver 25 0.25
3038   Wood Tool Rest (3" and 5" Rest) 55 0.75
3047   Extended Wood Tool Rest Set 60 0.25
3049   Boring Head (Metric) 70 0.75
3050   Vertical Milling Column(Inch) 150 8
3052   Fly Cutter 35 0.5
3053   Vertical Milling Column Metric (Mounts to Lathe to convert lathe in to a 3 axix mill) 150 8
3054   Boaring Head (uses 3/8" round boring tools) Inch 70 0.75
3055   #1 Morse Blank 16 0.5
3056   T-Nuts, 10-32 (set of 10) 8 0.15
3057   Rocker Tool Post 30 0.25.
3058   4-Jaw hold down set 6 0.15
3060   Milling Collet Set (Inch 1/8, 3/16, &1/4") 45 0.15
3060   Milling collet set (inch, 1/8",3/16",1/4") 45 0.15
3061   Boring Tool (Max Depth 0.600" Min.Hole 1/4") 15 0.15
3063   1" BORING TOOL (Use with P/N 3054) 1/16  15 0.15
3064   1.5" BORING TOOL (Use with P/N 3054) 1/16  18 0.15
3065   Slitting saw holder 40 0.25
3070   2.5" Diax 1 5/16" 12L14 steel blank(Unfinished chuckBody….. 25 2
3072   1/4" Jacobs Drill Chuck w/ 1M arbor, drawbolt, key 50 0.5
3073   3/8" Jacobs Drill Chuck w/ 1M arbor, drawbolt, key 60 0.75
3074   Drill chuck holder (for 1/4" or 3/8" jacobs chuck) 35 0.5
3075   5/16" End mill holder 30 0.5
3076   6.0 mm End mill holder 30 0.5
3077   8.0 mm End mill holder 30 0.5
3078   10.0 mm End mill holder 30 0.5
3079   3/8"End mill holder(for 1/4",3/16"and 1/8" holders) 30 0.5
3080   End mill set (1/4" shank) (1/8",3/16",1/4") 30 0.05
3086 0 CUT OFF TOOL BLADE (Use with 3002) 1/16  ?????? 17 1/16lb
3087   3/32" Mill Collet 20 0.05
3089   5/32" Mill Collet 20 0.05
3090   Milling collet set (metric,  3.0, 4.0 & 6.0 mm) 45 0.15
3091   7/32" Mill Collet 20 0.05
3100   Thread Cutting Attachment 125 3
3200   Indexing Attachment 200 8
3217   Gear Tooth Cutter Holder & 1/4" HSS Tool Blank 35 0.5
3230   Mill Arbor - 7/8" dia (short) 50 0.5
3231   Mill Arbor - 7/8" dia (long) 50 0.5
3235   Mill Arbor - 1" dia (short) 50 0.5
3236   Mill Arbor - 1" dia (long) 50 0.5
3306   DC Motor & HeadStock Assy 300 10
3307   DC Motor & HeadStock Assy with speed control & 10,000 RPM Pulley 380 10
3400   Over Size 2.5" Hand Wheel (Inch) 15 0.15
3410   Oversize (2.5" dia) Hand Wheel Metric 15 0.15
3420   2" Adj. Zero HandWheel(cross Slide) Inch 35 0.25
3428   2" Adj. Zero HandWheel(lead screw) Inch 35 0.25
3429   2" Adj. Zero HandWheel(lead screw) Metric 35 0.25
3430   2" Dia Adjustable Handwheel (Metric) 35 0.25
3440   2.5" Adj. Zero HandWheel( Inch) 40 0.25
3450   2.5" Dia Adjustable Handwheel (Metric) 40 0.25
3460   2.5" Adj. Zero HandWheel w/thrust& brng set for z axis( Inch) 45 0.25
3465   2.5" Adj. Zero HandWheel w/thrust& brng set for z axis( Metric) 45 0.25
3480   Dlx Vertical Milling Column for lathe w/adj.zero handwhlsInch 170 8
3485   Dlx Vertical Milling Column for lathe w/adj.zero handwhlsMETRIC 170 8
3500   Rotary Column attachment 80 1.75
3559   90 deg. Angle plate 100 4
3560   Mill tooling plate 60 2.5
3575   Milling vise(P/N3551) w/Rotating Mill Vise Base(P/N3570) 165 2.5
3605   30° SPIRAL KNURLS, 90 D-20TPI (2)  24 1/16lb
3606   30° SPIRAL KNURLS, 90 D-25TPI (2)  24 1/16lb
3607   30° SPIRAL KNURLS, 90 D-30TPI (2)  24 1/16lb
3608   30° SPIRAL KNURLS, 90 D-35TPI (2)  24 1/16lb
3609   30° SPIRAL KNURLS, 90 D-40TPI (2)  24 1/16lb
3610   30° SPIRAL KNURLS, 70 D-50TPI (2) 24 1/16lb
3611    30° SPRIAL KNURLS, 70 D-80TPI (2)  24 1/16lb
3612   STRAIGHT TOOTH KNURLS, 90 D-16TPI (2)  24 1/16lb
3613   STRAIGHT TOOTH KNURLS, 90 D-20TPI (2)  24 1/16lb
3614   STRAIGHT TOOTH KNURLS, 90 D-25TPI (2)  24 1/16lb
3615   STRAIGHT TOOTH KNURLS, 90 D-30TPI (2)  24 1/16lb
3616   STRAIGHT TOOTH KNURLS, 90 D-32TPI (2)  24 1/16lb
3617   STRAIGHT TOOTH KNURLS, 90 D-35TPI (2)  24 1/16lb
3618   STRAIGHT TOOTH KNURLS, 90 D-40TPI (2)  24 1/16lb
3619   STRAIGHT TOOTH KNURLS, 90 D-41TPI (2)  24 1/16lb
3620   STRAIGHT TOOTH KNURLS, 90 D-47TPI (2)  24 1/16lb
3621   STRAIGHT TOOTH KNURLS, 70 D-35TPI (2)  24 1/16lb
3622   STRAIGHT TOOTH KNURLS, 70 D-50TPI (2)  24 1/16lb
3623   STRAIGHT TOOTH KNURLS, 70 D-53TPI (2)  24 1/16lb
3624   STRAIGHT TOOTH KNURLS, 70 D-60TPI (2)  24 1/16lb
3625   STRAIGHT TOOTH KNURLS, 70 D-70TPI (2)  24 1/16lb
3626   STRAIGHT TOOTH KNURLS, 70 D-80TPI (2)  24 1/16lb
3700   4" Rotary table 270 8
3701   Right angle attachment(use with P/N 3700) 75 3
3702   Right angle adjustable tailstock(for use with P/N 3700) 75 2
3750   Tilting angle table 110 2.5
4004 0 Drive Belt ???? ???
4017 U Mill saddle lock lever up-grade 25 0.5
4117 Z Mill CNC Z axis backlash adjustment upgrade Metric 35 0.75
4150   15" Lathe Vinyl Cover 10 0.25
4151   24" Lathe vinyl cover 12 0.25
4335   10,000 RPM Pulley Conversion 80 1
4360   Chip guard 15 0.5
4417 Z Lathe CNC Lead Screw Backlash Adj Upgrade ( inch) what about 4417 ZM Metric  ?? 35 0.5
5150   Mill Vinyl dust cover, 5000 series mill 12 0.25
5151   Mill Vinyl dust cover, 2000 series mill 15 0.25
5325   Sherline Tools and Accessories catalog  (8-Ed) 0 0.5
5327   Sherline Accessories Shop Guide (6-Ed) 10 3
5328 DVD Steam Engine Video , Rudy Kouhoupt 72.95 1.5
5329 DVD DVD Shop Secrets (Measuring Tools Video) 39.95 1
5330   Safety glasses 30 0.25
5410 A Delux 3-Axis Mill with Package A - 12"Base,Adj.ZeroHandWheels…etc and conversion as per 6100/6101 1020 45
5410 DRO Delux Mill (Metric) W/DRO 1120 41
6079   1/4" End mill holder 30 0.5
6080   3/16" End mill holder 30 0.5
6081   1/8" End mill holder 30 0.5
6100   Horizontal Milling Conversion 130 11
6101   Column Conversion for Delux 3 Axis Mill 5410A to conver it as 6101(Service Charge) 15 0
7001   1/16" SHORT END MILL  10 1/16lb
7002   3/32" SHORT END MILL  10 1/16lb
7004   5/32" SHORT END MILL  10 1/16lb
7006   7/32" SHORT END MILL  10 1/16lb
7100   1/16" LONG END MILL  10 1/16lb
7101   5/64" LONG END MILL  10 1/16lb
7102   3/32" LONG END MILL  10 1/16lb
7103   7/64" LONG END MILL 10 1/16lb
7104   1/8" LONG END MILL  10 1/16lb
7105    9/64" LONG END MILL  10 1/16lb
7106   5/32" LONG END MILL  10 1/16lb
7107   11/64" LONG END MILL  10 1/16lb
7108   3/16" LONG END MILL  10 1/16lb
7109   13/64" LONG END MILL  10 1/16lb
7110   15/64" LONG END MILL  10 1/16lb
7111   1/4" LONG END MILL  10 1/16lb
7200   1/16" BALL END MILL  10 1/16lb
7201   3/32" BALL END MILL  10 1/16lb
7203   1/8" BALL END MILL  10 1/16lb
7204   5/32" BALL END MILL  10 1/16lb
7205   3/16" BALL END MILL  10 1/16lb
7206   7/32" BALL END MILL  10 1/16lb
7207   1/4"BALL END MILL  10 1/16lb
7301   #25 (.010) SLITTING SAW (1/2" HOLE)  13 1/16lb
7302   #40 (.020) SLITTING SAW (1/2" HOLE)  14 1/16lb
7303   #57 (.032) SLITTING SAW (1/2" HOLE)  11 1/16lb
7304   #53 (.051) SLITTING SAW (1/2" HOLE)  13 1/16lb
7400   3/8" End mill sets 6 pcs with holder, 2 flute,1/8 to 3/8 50 3/4lb
7401   6 PC 3/8" END MILL SET (4-FL) w/holder 3/4 (Sizes 1/8, 5/32, 1/4, 3/16, 5/16, 3/8") 50 3/4lb
7402   1/8" DOUBLE END MILL (3/8" SHK-2FL)  9 1/16lb
7403   3/16" DOUBLE END MILL (3/8" SHK-2FL)  9 1/16lb
7404   1/4" DOUBLE END MILL (3/8" SHK-2FL)  9 1/16lb
7405   5/16" DOUBLE END MILL (3/8" SHK-2FL)  9 1/16lb
7406   3/8" DOUBLE END MILL (3/8" SHK-2FL)  9 1/16lb
7410   1/8" DOUBLE END MILL (3/8" SHK-4FL)  9 1/16lb
7411   3/16" DOUBLE END MILL (3/8" SHK-4FL)  9 1/16lb
7412   1/4" DOUBLE END MILL (3/8" SHK-4FL)  9 1/16lb
7413   5/16" DOUBLE END MILL (3/8" SHK-4FL)  9 1/16lb
7414   3/8" DOUBLE END MILL (3/8" SHK-4FL)  9 1/16lb
7415   3/16" SGL FLT CNTERSNK (3/16" SHK)  6 1/16lb
7416   1/4" SGL FLUTE CNTERSINK (1/4" SHK)  6 1/16lb
7417   5/16" SGL FLT CNTERSINK (1/4" SHK)  7 1/16lb
7418   3/8" SGL FLUTE CNTERSNK (1/4" SHK)  7.25 1/16lb
7420   45° DOVETAIL CUTTER, 3/8 SHK-1/2" DIA  25 1/16lb
7421    60° DOVETAIL CUTTER, 3/8 SHK-1/2" DIA  22.5 1/16lb
7430   1/2" SGL END MILL (3/8" SHK-2FL)  10 1/16lb
7431   1/2" SGL END MILL (3/8" SHK-4FL)  10 1/16lb
7500   ANGLE PLATE, 3" x 2-1/2" x 2"  35 1/2lb
7502   ANGLE PLATE, 2" x 2" (Set of 2)  33 1/2lb
7505   Set of 2.5" x 1/16" Parallels (5 pair 1/4 to 3/4" by 1/8's 30 0.25
7505   Set of 2.5" x 1/16" Parallels(5pair, 1/4" to 3/4" by 1/8's) 30 0.25
7550   Super-lub multi-purpose grease with PTFE, 3 oz. tube 5 0.25
7555   Super Lub Dri-film lubricant spray 8 1
7600   3/8" Insert holder tool post 20 0.25
7610   55 Deg Negative Rake Insert Holder with insert 60 0.5
7611   55 Deg Diamond Tipped Insert(Fits Std55DegCarbideInsertHdr 105 0.05
7612   Replacement 4-sided Carbide Insert Tool for 7610 17 0.05
7618   80 Deg Right Hand insert holder 45 0.1
7620   Single flute Insert Fly Cutter 60 0.5
7622   Replacement carbide tip (for P/N 7620) 15.52 0.05
7628   80 Deg Left Hand insert holder 45 0.1
8900   High Speed Engraving Head and Spindle 245 3.5
8976   Tool Post for 8900 High Speed Grinder 35 0.5
8987   Riser  Tool Post for 8900 high speed grinder. 40 0.5
11920 0 CARBIDE TOOL BIT, RIGHT-HAND  7 1/16lb
11930 0 CARBIDE TOOL BIT, LEFT-HAND  7 1/16lb
11940 0 60° CARBIDE TOOL BIT  7 1/16lb
11941 1 60° CARB. TOOL BIT w/ 1/64" nose rad. (for profiling)  8.01 1/16lb
11950 0 RIGHT HAND, HS STEEL CUTTING TOOL (1/4" SQ)  7 1/16lb
11960 0 LEFT HAND, HS STEEL CUTTING TOOL (1/4" SQ)  7 1/16lb
11970 0 BORING TOOL, HS STEEL CUTTING TOOL  15 1/16lb
30240 0 #1 CENTER DRILL (60°)  7 1/16lb
30260 0 #2 CENTER DRILL (60°)  7 1/16lb
30270 0 #3 CENTER DRILL (60°)  7 1/16lb
30280 0 #000 CENTER DRILL (60°)  9 1/16lb
30290 0 #00 CENTER DRILL (60°)  8 1/16lb
30300 0  #0 CENTER DRILL (60°)  8 1/16lb
30810 0 1/4" SHORT END MILL  10 1/16lb
30820 0 1/8" SHORT END MILL  10 1/16lb
30830 0 3/16" SHORT END MILL  10 1/16lb
37094 4 3/8-24 Rotary Chuck adaptor(3/8-24Jacob Chuck can be mounted to Sherline Rotary table 3700) 15  
3005B  B HSS TOOL BLANK (1/4" SQ) (Includes 5 blanks)  10 1/4lb
7605B B Carbide Insert for 55 Deg Holders(2CuttingEdges)Bulk of 10 95 0.1
7608B B Carbide Insert for 80 Deg Holders(2CuttingEdges)Bulk of 10 75 0.1
NOTE        
  1 Prices are given in USD. After selecting your requirement    
    please ask for a proforma invoice from Precision Tools.    
    Pls ask for any clarification through e-mail  (akila@precisiontools.com.sg). We will give you the prices in USD and/or Sing Dollars plus 10% Handling Fees & other relevant details.    
         
         
  2 If the sale is made with in Singapore, GST will be charged at extra. For exports, No GST    
         
  3 Weights given are indicative, only for reference    
  4 Errors & Ommissions if any will be / or permitted to be corrected    
  6 If the total order exceeds for accessories,  & tools USD500, we will charge only 3% for handling fees instead of 10%.    
  7 After you receive our proforma-invoice, please remit the invoice amount through Cashier's Cheque or wire transfer or through PayPal. After receipt of full payment, the goods will be shipped.    
  8 Delivery with in Singapore is free if the order exceeds USD100.     
  9 For overseas order, FedEx Charges are extra on buyers account.    
|